The E-250 is the latest phono amplifier from LUXMAN, inheriting the best in design from its predecessor the E-200 that has been the reference model for compact phono equalizer amplifiers since it was released in 2008.

Luxman E-250 - Phono Amplifier

A complete phono equaliser designed for rich vinyl playback.

The E-250 is the latest phono amplifier from LUXMAN, inheriting the best in design from its predecessor the E-200 that has been the reference model for compact phono equalizer amplifiers since it was released in 2008. A newly added function to the E-250 is the switching capability of load impedance and load capacity according to the cartridge characteristics for the ultimate enjoyment of the original detail of analog reproduction. The E-250 allows the listener to adjust the fine settings for every performance, releasing the expression engraved in the grooves and creating a hitherto unknown musical impression.

The rear panel is equipped with a load impedance selector (34k/47k/56k/100kO) and a load capacity selector (0p/100p/220p/320pF) to match the characteristics of the cartridge and exploiting it to its full potential.

Specially Selected Embedded MC Transformer

The E-250 features a step-up transformer with a 2 stage gain selection function in which a L/R independent super permalloy core is used, thereby supporting even low impedance MC cartridges. This creates a rich and expressive musicality that is only possible by boosting of the transformer.

The newly developed low profile, large capacity block capacitor together with a regulator circuit with discrete configuration that are used in the power supply circuit achieve the desired high quality power supply environment. The E-250 power supply circuit also features LUXMAN’s original round pattern board allowing the smooth transmission of the delicate sound signals.

The articulation function is designed to demagnetize the cartridge and the MC transformer using the signal current of music reproduced when magnetization of the cartridge has caused the sound quality to deteriorate. The articulation function can help to restore the cartridge to its original characteristics and maintain quality at a maximum level.

The NF type equalizer circuit in the E-250 features many of LUXMAN’s original and custom built parts. This equalizer has a high S/N ratio which reduces noise by connecting the first stage FET in parallel. A monaural switch when playing a monaural record is provided as well as a low cut switch that cuts out low frequency signals that can be generated by distorted records.

The input can be selected from the front panel with ‘one touch’ operation from 2 players or a player with a twin arm. The option to easily change the cartridge type with respect to the input allows a favourite cartridge to be chosen for each phonograph record.

The front panel design of the E-250 is finished with blaster white and offers lever type control switches on a compact sized body. This mechanically designed layout exudes a sense of class. * Specifications and appearance are subject to change without notice.

*The product listed does not include line cables. Please purchase cables separately.

The LX-380 represents a new era in golden ‘38’ series vacuum tube integrated amplifiers from LUXMAN. Providing an exceptionally deep resonance of sound sources of various ages and genres, the LX-380 combines LECUA* - a computerized attenuator which carefu

Luxman LX-380 - Vacuum Tube Integrated Amplifier

Capturing the era of the ‘38’ – the aspiration of a new vacuum tube amplifier.

The LX-380 represents a new era in golden ‘38’ series vacuum tube integrated amplifiers from LUXMAN. Providing an exceptionally deep resonance of sound sources of various ages and genres, the LX-380 combines LECUA* - a computerized attenuator which carefully reproduces the dynamism of each performance - with a power amplifier circuit that expresses the rich musicality of the 6L6GC output tube. Housed in a wooden case that is reminiscent of the 28 series, the LX-380 appeals to a new generation with a winning combination of cutting edge technology and traditional know-how. *LECUA is an abbreviation of Luxman Electric Controlled Ultimate Attenuator.

The LX-380 is equipped with the 6L6GC beam power tube that has a reputation for high quality, stability and a delicate, soft tonal quality. The rated output of 20W+20W that is sufficient for a domestic sound system is achieved through the combination of a powerful, flexible Mullard type driver stage with a push pull structure final stage. This adopts a fixed bias type to maintain a constant grid voltage. The auditory drive force that is created by a vacuum tube amplifier is not easily quantified. This and a dense, mellow tonal quality have been achieved comfortably in the design of the LX-380 not with a high-power specification but by building in a margin in the vacuum tube and peripherals. The combination of experience and original design knowledge results in longevity of enjoyment of this product with long term peace of mind.

The elegant exterior in a natural veneer finish in a full sized (440mm) square wooden case is reminiscent of the original classic layout that consists of a combination of knob and lever switches made of machined aluminium and resin.

The First Ever Vacuum Tube Amplifier to Feature LECUA

The LX-380 is the first vacuum tube amplifier to feature LECUA, the proprietary computerized control attenuator from LUXMAN that enables the sound to be adjusted smoothly with minimal deterioration using an 88-step method. The LX-380 uses the same high sound quality semiconductor circuit that has been successfully proven in integrated amplifiers such as the L-590AX.

The LX-380 is equipped with an electronically controlled tone control function (bass/treble) for delicate adjustments to the tonal quality per the sound source and listening environment, with 3 selectable turnover frequency positions. The loudness mode interlocks with the sound volume to enable the correction of bass and treble ranges depending on human hearing characteristics.

Due to their profound sound quality, analog records are now becoming popular again and the LX-380 is therefore equipped with a high sound quality semiconductor structured phono amplifier circuit that is compatible with MM/MC types. This circuit derives from the concept of the LUXMAN integrated amplifier and allows users to enjoy genuine analog record playback without adding an extra dedicated phono amplifier. A subsonic switch is provided on the front panel to suppress any woofer fluctuation that is caused by low frequency signals from warped records as well as a monaural switch to activate L channel or R channel with the same signal at monaural record playback. Such detailed design and functionality enable the full enjoyment of analog playback.

Future Proof Separate Amplifier Structure

The pre/main amplifier circuits can be separated by a switch enabling the bi-amplifier structure in which a power amplifier can be added and the surround sound environment enhanced using an AV amplifier. The LX-380 is designed so that it can be expanded as part of a system for future upgrades and has a headphone output for private sound enjoyment.

The rear panel of the LX-380 is equipped with 18mm pitch gold plated RCA terminals to support high grade line cables with large plugs and speaker terminals (2 lines) in inline layout, and are compatible with Y lugs to connect easily with extra thick speaker cables.

The LX-380 has been designed to be durable with sufficient margin built in for operating voltage and heat radiation from the vacuum tube.

The LX-380 represents a new era in golden ‘38’ series vacuum tube integrated amplifiers from LUXMAN. Providing an exceptionally deep resonance of sound sources of various ages and genres, the LX-380 combines LECUA* - a computerized attenuator which carefully reproduces the dynamism of each performance - with a power amplifier circuit that expresses the rich musicality of the 6L6GC output tube.

Breathtakingly realistic, full of harmony A flagship model that breathes new life into the listening experience  Once you turn up the volume, you’ll be captivated by the sense of reality. A spacious sound stage opens up in front of you, filling the space beautifully. A miraculous experience unfolds where music breathes energy into life. What we sought for our flagship model was the ultimate expression in art form that is musical reproduction. The C-10X is equipped with our new “LIFES” amplifier feedback engine and the latest version of our original electronically controlled attenuator, “LECUA-EX”, technologies developed to lead LUXMAN into our next century. Fully-balanced audio pathways are directly connected throughout the three-dimensional structure, achieving infinite silence, overwhelming instantaneous power, and a true sense of realism. This is the birth of the C-10X control amplifier, heralding a new era of pure musical reproduction.

Breathtakingly realistic, full of harmony A flagship model that breathes new life into the listening experience  Once you turn up the volume, you’ll be captivated by the sense of reality. A spacious sound stage opens up in front of you, filling the space 

Luxman C-10X Control Amplifier

Direct, three-dimensional connections between fully balanced amplifier circuit and attenuator.  As a flagship model that stands at the top of our lineup, the C-10X not only has high-performance preamplifier circuitry that confidently drives the power amplifiers connected in the following stage, but also has a rich array of functions as a control center that adjusts the environment of the entire audio system. Preamplifier gain has been increased to 15dB (previous model C-900u had 12dB), allowing accurate handling of a wide range of levels from various input sources without distortion. In addition to a variety of output mode switching functions that allow you to select unbalanced, balanced or bi-amplified configuration, depending on your system, you can also use the volume shift function in 0.5dB steps via the electronically controlled attenuator LECUA-EX main volume control system. This allows you to adjust left and right balance (L: -6dB to R: -6dB) without causing deterioration, adjust the level for each output system in bi-amp mode (±6dB for each system) and adjust the output level for different listening situations. If it also equipped with an input offset function (0 to -6dB for each input terminal) that allows you to align the levels of multiple input devices, achieving a wide variety of control functions despite its simple circuit configuration.

Abundant functions and easy-to-operate remote control  The C-10X features an electronically controlled bass/treble tone control, a volume-linked loudness function that matches human hearing characteristics, an external pre-input terminal that can directly connect to the pre-output of an AV amplifier. A balanced connection phase preset function that can be set independently is provided. Also included is an aluminum remote control that providing comfortable operation of most of the C-10X’s functions at your fingertips.  Newly developed weight rotation mechanism The LECUA-EX volume control combines a high-precision rotary encoder with a newly developed weighted rotation mechanism to achieve high reliability and a high-quality feel as you rotate the large, machined aluminum knob over 192 discrete steps from 0 to 95.5dB. A tactile setting that smoothly accelerates the volume increase/decrease by increasing rotation speed or pressing and holding the remote control, provides a comfortable volume operation that surpasses conventional volume devices that use variable resistors.

Highly regulated power supply.  In order to embody the idea of abundant energy that accurately drives the power amplifier stage within sufficient margins, the power supply section of the C-10X is equipped with a powerful CI core type power transformer and seven custom specified 3,300 μF filter capacitors achieve dedicated highly stable power supply smoothing for each channel. Clean and stable regulation suppresses voltage fluctuations due to load.

100 μm thick non-angled wiring pattern.  All audio circuit boards in the C-10X uses a 100 μm- thick non resistive gold-plated peel-coated substrate that eliminates the resistivity coating which adversely affects sound quality due to dielectric effects. LUXMAN’s original know-how in pursuit of high sound quality is also seen in the original non-angled wiring pattern that achieves smooth and stress-free signal transmission by keeping the trace width of the signal line as constant as possible and drawing a smooth curve.  Carefully selected, high-quality components.  For the capacitors and resistors in the audio signal path, we have used a large number of custom designed components that prioritize sound quality. Original OFC cable is used for internal wiring. Input and output sections on the rear panel are equipped with 27mm pitch, robust RCA terminals and high-quality Neutrik XLR terminals to contribute the high standards of the C-10X.

Input sensitivity/ Input impedance	Unbalanced 180mV/45kΩ Balanced 180mV/90kΩ Output/Input impedance	Unbalanced rating 1V/90Ω, max. 14.1V Balanced rating 1V/180Ω, max. 28.7V Frequency response	20Hz to 20kHz (+0, within -0.1dB) 5Hz to 110kHz (+0, within -3.0dB) Total harmonic distortion	Unbalanced 0.005% (20Hz to 20kHz) Balanced 0.003% (20Hz to 20kHz) S/N ratio (IHF-A)	Unbalanced 129dB Balanced 132dB Volume control	LECUA-EX Amplification feedback circuit	LIFES 1.0 Max. change amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz Remote control functions	Operation, Dimmer, Input selector Output mode (Unbalanced, Balanced, Bi-amp) Balanced phase switching Channel preset (Balanced phase setting, Input level offset setting, Bi-amp output level setting) External pre-amplifier input Line straight, Loudness, Volume up/down, Mute Zoom display Power consumption	40W, 2.6W (at standby) External dimensions	440(W) x 130(H) x 434(D) mm front side knob of 16mm and rear side terminal of 15mm included in depth Net weight	19.8kg (main unit) Accessories	Remote control (RA-20), Power cable

An attractive custom vacuum tube control amplifierThe CL-38uC uses SRPP (Shunt Regulated Push Pull) circuitry for all stages to achieve the highest sound quality possible.A genuine phono equalizer is included, the MC-low and MC-high impedance (gain) inputs each have independent MC transformers and are selectable using the MC impedance lever switch.Tone controls enable the listener to fine tune the sound quality.Refined exterior design and newly added balanced inputs make this vacuum tube control amp a new standard for its generation.

An attractive custom vacuum tube control amplifierThe CL-38uC uses SRPP (Shunt Regulated Push Pull) circuitry for all stages to achieve the highest sound quality possible.A genuine phono equalizer is included, the MC-low and MC-high impedance (gain) input

Luxman CL-38uC Tube Control Preamplifier

Input sensitivity/ input impedance	PHONO (MM): 2.0mV/47kΩ PHONO (MC high): 0.3mV/100Ω PHONO (MC low): 0.08mV/30Ω LINE: 190mV/50kΩ BAL.LINE: 190mV/20kΩ *2 Output/output impedance	Rated 1V/300Ω Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE/BAL.LINE: 10Hz to 70kHz (within -3.0dB) Total harmonic distortion	0.006% or less (1kHz) 0.06% or less (20Hz to 20kHz) S/N ratio (IHF-A)	PHONO (MM): 68dB or more PHONO (MC high): 63dB or more PHONO (MC low): 60dB or more LINE/BAL.LINE: 100dB or more Tone control	±8dB, selectable frequency range BASS: 150/300/600Hz, TREBLE: 1.5k/3k/6kHz Low cut	30Hz(-6dB/oct.) Circuit	SRPP Vacuum tubes	ECC83S×3, ECC82×5 Power supply	230V~(50Hz)/115V~(60Hz) Power consumption	35W External dimensions	440(W) x 169(H) x 307(D) mm 19mm front panel knob of and 12mm rear panel terminals are included in the depth measurement Net weight	13.3kg (main unit)

At LUXMAN, we don’t consider a technology “advanced” unless it advances your ability to delight in music. That principle reaches its highest expression in the CL-1000, our flagship vacuum tube control amplifier. Successor to the classic C-1000 released in 1975, the CL-1000 pairs beautifully with the acclaimed MQ-300 vacuum tube stereo power amplifier. Both reflect LUXMAN’s singular expertise in vacuum tube audio. In the 1960s, when the audio industry moved en masse into transistor amplifiers, LUXMAN recognized the ineffable beauty of the tube music reproduction. And we’ve continued to build tube components without interruption. While the CL-1000 salutes the past, it also embodies the best of today with a major step forward in sonic clarity: the transformer-assisted volume control we call LECUTA (Luxman Electronically Controlled Ultimate Transformer Attenuator). In addition, super permalloy core output transformers contribute to a vivid sound stage. Covered in natural walnut with a rosewood gloss finish, the cabinet lends a touch of warmth and refinement. All told, the CL-1000 brings advanced technology and musical refinement together in harmony.

At LUXMAN, we don’t consider a technology “advanced” unless it advances your ability to delight in music. That principle reaches its highest expression in the CL-1000, our flagship vacuum tube control amplifier. Successor to the classic C-1000 released in

Luxman CL-1000 Preamplifier

Vacuum Tube Control Pre- Amplifier With In-Built Phono  Stage MM/MC, LECUTA Trans- former Coupled Attenuator, 2xBAL  & 2xRCA Output, 1xBAL & 4xR- CA Input, MM /MC Phono Input  With Selectable Loading, 6xE88CC, Tone Controls

Input sensitivity	 LINE / BAL.LINE	：	180 mV / 1 V output, 1 kHz, load 50 kΩ EXT-IN (PHONO)  MM 100 kΩ (38 dB)	：	2.2 mV / 1 V output, 1 kHz, load 50 kΩ  MM 50 kΩ (38 dB)	：	2.2 mV / 1 V output, 1 kHz, load 50 kΩ  MM 33 kΩ (38 dB)	：	2.2 mV / 1 V output, 1 kHz, load 50 kΩ  MC-H 1 kΩ (57 dB)	：	0.26 mV / 1 V output, 1 kHz, load 50 kΩ  MC-M 40 Ω (57 dB)	：	0.26 mV / 1 V output, 1 kHz, load 50 kΩ  MC-L 10 Ω (66 dB)	：	87 μV / 1 V output, 1 kHz, load 50 kΩ Input impedance	 LINE	：	90 kΩ / 1 kHz BAL.LINE	：	70 kΩ / 1 kHz EXT-IN (PHONO)  MM	：	100 kΩ, 50 kΩ, 33 kΩ  MC	：	1 kΩ, 40 Ω, 10 Ω Output impedance	LINE / BAL.LINE ： 1 kΩ / 1 kHz Frequency response	 LINE / BAL.LINE	：	+0.3, -0 dB / 1 V output, 20 Hz to 20 kHz, load 50 kΩ EXT-IN (PHONO)	：	±0.3 dB / 1 V output, 20 Hz to 20 kHz, load 50 kΩ Total harmonic distortion	 LINE / BAL.LINE	：	0.016 % / 1 V output, 1 kHz, load 50 kΩ EXT-IN (PHONO)  MM	：	0.3 % / 1 V output, 1 kHz, load 50 kΩ  MC (H, M)	：	0.3 % / 1 V output, 1 kHz, load 50 kΩ  MC (L)	：	0.5 % / 1 V output, 1 kHz, load 50 kΩ S/N ratio	 LINE / BAL.LINE	：	120 dB (IHF-A) / distortion 1%, 1 kHz, load 50 kΩ EXT-IN (PHONO)  MM	：	108 dB (IHF-A) / distortion 1%, 1 kHz, load 50 kΩ  MC (H, M)	：	92 dB (IHF-A) / distortion 1%, 1 kHz, load 50 kΩ  MC (L)	：	83 dB (IHF-A) / distortion 1%, 1 kHz, load 50 kΩ Tone control	 Max. amount of change	：	±8 dB Bass turnover frequency	：	150 Hz, 300 Hz, 600 Hz Treble turnover frequency	：	1.5 kHz, 3 kHz, 6 kHz Low cut	30 Hz (-6 dB / oct.) Circuiting system	2-step amplification P-K NF type, tone control P-G NF type, phono equalizer NF type Vacuum tube used	E88CC (manufactured by JJ Electronic / reliable tube) x 6 Power supply	230 V～(50 Hz)/115 V～ (60 Hz) Power consumption	52 W Dimensions	18.1(W) x 6.5(H) x 17.9 (D) inches Net weight	54 lbs Accessories	Power cable

Now a single digital player embodies the most advanced digital decoding along with the most enduring approaches to design and engineering. LUXMAN’s new D-03X combines traditional red-book CD playback with an advanced hi-res DAC circuit featuring MQA full decoding. Of crucial importance, the D-03X inherits the philosophy and experience of successive LUXMAN digital players and remains true to timeless LUXMAN design principles, including rugged chassis, oversized power supply and meticulous circuit selection. The result: reproduction of effortless musicality.

Now a single digital player embodies the most advanced digital decoding along with the most enduring approaches to design and engineering. LUXMAN’s new D-03X combines traditional red-book CD playback with an advanced hi-res DAC circuit featuring MQA full 

Luxman D-03X Digital Player

Supported discs	CD (CD-R, CD-RW, MQA-CD) Supported sampling frequencies	USB input (PCM) : 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz (16, 24, 32-bit) USB input (DSD) : 2.8 MHz, 5.6 MHz, 11.2 MHz (1-bit) Coaxial / Optical input : 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 20, 24-bit) Analog output voltage / impedance	Unbalanced : 2.4 V / 300 Ω, Balanced : 2.4 V / 600 Ω, DSD : 1.7 V Frequency response	CD : 5 Hz to 20 kHz (+0, -1.0 dB) Coaxial / Optical : 5 Hz to 47 kHz (+0, -3.0 dB) USB : 5 Hz to 47 kHz (+0, -3.0 dB) Total harmonic distortion	CD : 0.003 %, Coaxial / Optical : 0.002 %, USB : 0.002 % S/N ratio (IHF-A)	CD : 101 dB, Coaxial / Optical : 114 dB, USB : 113 dB D/A converter	Texas Instruments PCM1795 (monaural mode) x 2 Power supply	230 V～(50 Hz) / 115 V～ (60 Hz) Power consumption	18W Dimensions	17.3 x 5.2 x 16.1 front side knob of 2 mm and rear side terminal of 8 mm included in depth Net weight	29.6 lbs Accessories	Remote control (RD-28), Power cable

Following standards set by our D-10X flagship model, high-end BD34301EKV DAC chips manufactured by Rohm Co., Ltd. in dual monaural configuration lie at the core of the digital circuitry that processes various digital media from discs, such as CDs and SACDs, to the latest high resolution audio files with exceptional quality. Over a USB input from a PC, Mac, NAS for audio, etc., the D-07X supports a wide range of format encoding up to PCM768kHz/32 bit and DSD22.4MHz. Bulk Pet transfer, which equalizes transmission load, can also be selected by using our dedicated driver software. Furthermore, for the popular high-quality format MQA (MQA-CD/MQA file), which expands the field of optical discs, streaming USB, COAX, and optical. The clocking system is designed to support accurate digital signal processing and is equipped with two high-precision, low-jitter, ultra-low phase noise modules that reduce noise near the oscillation frequency to a minimum. There is also a built-in, 2-mode analog FIR filter that allows you to select your preferred sound quality when playing SACD or DSD files.

Following standards set by our D-10X flagship model, high-end BD34301EKV DAC chips manufactured by Rohm Co., Ltd. in dual monaural configuration lie at the core of the digital circuitry that processes various digital media from discs, such as CDs and SACD

Luxman D-07x Digital Player (SACD)

Advanced DAC circuitry, reproducing digital media with excellent sound quality  Following standards set by our D-10X flagship model, high-end BD34301EKV DAC chips manufactured by Rohm Co., Ltd. in dual monaural configuration lie at the core of the digital circuitry that processes various digital media from discs, such as CDs and SACDs, to the latest high resolution audio files with exceptional quality. Over a USB input from a PC, Mac, NAS for audio, etc., the D-07X supports a wide range of format encoding up to PCM768kHz/32 bit and DSD22.4MHz. Bulk Pet transfer, which equalizes transmission load, can also be selected by using our dedicated driver software. Furthermore, for the popular high-quality format MQA (MQA-CD/MQA file), which expands the field of optical discs, streaming USB, COAX, and optical. The clocking system is designed to support accurate digital signal processing and is equipped with two high-precision, low-jitter, ultra-low phase noise modules that reduce noise near the oscillation frequency to a minimum. There is also a built-in, 2-mode analog FIR filter that allows you to select your preferred sound quality when playing SACD or DSD files.

HIghly robust LxDTM-i drive mechanism  The D-07X employs a left-side mechanical layout with an asymmetric configuration that realizes the shortest and ideal audio signal path and affords space for high quality analog circuitry. The disc drive section that supports CD and SACD playback is based on our original, highly robust LxDTM mechanism, which features a robust box structure that covers the entire mechanism with a side frame and top plate. Our LxDTM-i* system has evolved into an integrated structure that firmly blocks external vibration by being mounted directly onto the strong chassis side panel, achieving high precision and stable signal reading performance, comparable to our D-10X flagship model. The disc tray is made of die-cast aluminum, eliminating unnecessary vibration and resonance effects on the loader mechanism and enabling precise and smooth loading operation. *LxDTM-i is an abbreviation for Luxman original Disc Transport Mechanism-improved, which realizes stable signal reading and mechanical integrity.

Newly developed discrete buffer circuitry  As a component that handles digital sources, high-precision signal reading by the drive mechanism and advanced digital signal processing are very important, but it goes without saying that the high performance analog output circuitry which determines the final audio quality is the most important factor in realizing that deep musical expression expected from high-end components designed by LUXMAN. The D-07X has a newly developed I/V conversion system that receives the differential outputs of the paired BD34301EKV DAC chips, operating in monaural mode, and feeds four discrete, perfectly matched amplifier modules. High-quality buffer circuitry lowers the impedance of the output signal. The unit powerfully drives any integrated amplifier or control amplifier that would be the next stage component. Out-of-audible-range filtering, which is essential for digital players, is performed in the buffer stage instead of having an independent LPF stage, enabling the reproduction of natural and smooth analog waveforms, resulting in higher clarity and more immediate sound quality.

Large-capacity power supply  The D-07X’s power transformer capacity has been increased by 50% compared to our D-06u model. Large capacity filter capacitors and independent regulator blocks have been installed for each circuit to develop a highly stable overall power supply environment traditional to LUXMAN. Again, clean and stable power has been achieved.

Accuracy, sensitivity, musicality  Welcome to the ultimate expression of musicality. Our flagship SACD/CD player, the D-10X builds on the brilliant heritage of our acclaimed D-08u, adding more playback capabilities, the latest conversion technology, a robustly reinforced mechanism and a refined analog output stage. Introducing LxDTM-i – the LUXMAN original Disc Transport Mechanism (improved). Here is the world premiere of the ROHM Semiconductor MUS-IC™ BD34301EKV digital-to-analog converter (as of May 2020). Introducing ODNF-u – Only Distortion Negative Feedback (ultimate) – in a fully balanced output amplifier. Well-grounded in fundamental principles and endowed with the most advanced mechanical, digital and analog technology, the LUXMAN D-10X opens the curtain on the ultimate soundstage.

Accuracy, sensitivity, musicality  Welcome to the ultimate expression of musicality. Our flagship SACD/CD player, the D-10X builds on the brilliant heritage of our acclaimed D-08u, adding more playback capabilities, the latest conversion technology, a rob

Luxman D-10X Digital Player

Supported discs	SACD, CD (CD-R, CD-RW, MQA-CD) Supported sampling frequencies	USB input (PCM) : 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz (16, 24, 32-bit) USB input (DSD) : 2.8 MHz, 5.6 MHz, 11.2 MHz, 22.4 MHz (1-bit) Coaxial / Optical input : 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 20, 24-bit) Analog output voltage / impedance	Unbalanced : 2.4 V / 300 Ω, Balanced : 2.4 V / 600 Ω For SACD / DSD : 1.3 V Frequency response	CD : 5 Hz to 20 kHz (+0, -1.0 dB) SACD : 5 Hz to 38 kHz (+0, -3.0 dB) USB : 5 Hz to 47 kHz (+0, -3.0 dB) Total harmonic distortion	CD : 0.0018 %, SACD : 0.001 %, USB : 0.0015 % S/N ratio (IHF-A)	CD : 125 dB, SACD : 121 dB, USB : 125 dB D/A converter	ROHM BD34301EKV (monaural mode) x 2 Power supply	230 V～(50 Hz) / 115 V～ (60 Hz) Power consumption	48W Dimensions	17.3(W) x 5.2(H) x 16.1(D) mm front side knob of 2 mm and rear side terminal of 13 mm included in depth Net weight	69 lbs.  Accessories	Remote control (RD-29), Power cable

Exceptional playback of Compact Disc and high-res audio files  Part of LUXMAN’s NeoClassico II Series, the compact D-N150 combines uncompromising audiophile design with exceptional flexibility.Audio bona fides include 5mm thick aluminum chassis and internal parts selected through exhaustive listening tests.Flexibility takes the form of coax, optical and USB digital inputs for converting hi-res audio files to gorgeous, unconstrained analog sound.

Exceptional playback of Compact Disc and high-res audio files  Part of LUXMAN’s NeoClassico II Series, the compact D-N150 combines uncompromising audiophile design with exceptional flexibility.Audio bona fides include 5mm thick aluminum chassis and intern

Luxman D-N150 Digital Player

Applicable disc	2channel CD, CD-R Supported sampling frequencies	USB input : 32kHz, 44.1kHz, 48kHz, 88.2kHz  96kHz, 176.4kHz, 192kHz(16, 24, 32bits) COAX/OPT input : 32kHz, 44.1kHz, 48kHz, 88.2kHz 96kHz, 176.4kHz, 192kHz (16, 20, 24bits) Analog output voltage / impedance	2.1V/300Ω Frequency response	CD :5Hz to 20kHz (+0, -0.5dB) COAX/OPT/USB :5Hz to 50kHz (+0, -3.0dB) Total harmonic distortion	0.005% S/N ratio (IHF-A)	110dB Power supply	230V~(50Hz) / 115V~(60Hz) Power consumption	13W External dimensions	11.7 x 3.9 x 8.7 4mm front panel knob of and 8mm rear panel  terminals are included in the depth measurement Net weight	17.6 Accessories	Remote control(RD-27),Power cable

As high-resolution music distribution and high-quality audio streaming services become more commonplace, LUXMAN unveils our new USB equipped D/A converter, the DA-07X, fully compatible with today’s diversifying digital music ecosystem. In order to competently handle current digital sources, LUXMAN has combined cutting-edge digital circuitry with our advanced analog audio technology know how. The DA-07X is a core component that breathes musicality and new life into digital audio reproduction and serves as a command center for modern audio systems as we move further into a new era.

As high-resolution music distribution and high-quality audio streaming services become more commonplace, LUXMAN unveils our new USB equipped D/A converter, the DA-07X, fully compatible with today’s diversifying digital music ecosystem. In order to compete

Luxman DA-07X DAC

Type	2 channel USB D/A converter Supported sampling frequency	USB input (PCM) : 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz (16, 24, 32-bit) USB input (DSD) : 2.8 MHz, 5.6 MHz, 11.2 MHz, 22.5 MHz (1-bit) Coaxial / Optical / AES/EBU input : 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (16, 20, 24-bit) Analog ouput voltage / impedance	Unbalanced : 2.4 V / 300 Ω, Balanced : 2.4 V / 600 Ω DSD format : 2.3 V Frequency response	5 Hz to 20 kHz (+0, -0.4 dB), 5 Hz to 47 kHz (+0, -3.0 dB) Total harmonic distortion	Unbalanced : 0.001 %, Balanced : 0.001 % S/N ratio (IHF-A)	124 dB D/A converter	ROHM BD34301EKV (monaural mode) x 2 Power supply	230 V～(50 Hz) / 115 V～ (60 Hz) Power consumption	21 W External dimensions	440(W) x 92(H) x 402(D) mm front side knob of 14 mm and rear side terminal of 8 mm included in depth Net weight	12.8 kg (main unit)

Designed in honor of our L-505 amplifier, which continues to fascinate many audio enthusiasts as possibly our most familiar hi-fi model and equipped with our newly developed “LIFES” amplifier feedback engine, which is at the core of LUXMAN’s contemporary designs, we would like to complete the Z series circle with the L-505Z. While inheriting all the high-quality sound and design know-how from our higher-end models, it has achieved even more as a multifunctional integrated amplifier. Redefining the standard and now entering a new era, the L-505Z invites you into the world of exciting high-end audio.

Designed in honor of our L-505 amplifier, which continues to fascinate many audio enthusiasts as possibly our most familiar hi-fi model and equipped with our newly developed “LIFES” amplifier feedback engine, which is at the core of LUXMAN’s contemporary 

Luxman L-505Z Integrated Amplifier

Rated output	100W + 100W (8Ω), 150W + 150W (4Ω) Input sensitivity/ input impedance	PHONO (MM): 2.5mV/47kΩ PHONO (MC): 0.3mV/100Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/55kΩ MAIN IN: 1V/47kΩ Output voltage	PRE OUT: 1V Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3dB) Total harmonic distortion	0.009% or less (8Ω, 1kHz) 0.09% or less (8Ω, 20Hz to 20kHz) S/N ratio (IHF-A)	PHONO (MM): 87dB or more PHONO (MC): 70dB or more LINE: 104dB or more Volume adjustment	LECUA Amplification feedback circuit	LIFES 1.0 Output configuration	Bipolar parallel push-pull Damping factor	200 Max. amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz Power supply	230V~(50Hz) / 115V~(60Hz) Power consumption	330W 90W (under no signal), 0.5W (at standby) External dimensions	440(W) x 178(H) x 454(D) mm front side knob of 20mm and rear side terminal of 27mm included in depth Net weight	22.5kg (main unit) Accessories	Remote control (RA-17A) Power cable Speaker terminal

Our latest amplification feedback engine brings music to life with LIFES Version 1.0Luxman will celebrate our 100th anniversary in 2025 and we are proud to announce the successor to our ODNF* feedback circuitry, which has contributed to the audio quality of our amplifier products since 1999. We have developed a new amplifier feedback circuit, LIFES*, which has acquired realistic, fresh and rich musicality and overwhelming audio performance. LIFES is based on the technical concept of our epoch-making ODNF circuit and realizes excellent, dynamic characteristics without feeding back any of the original audio input signal to the main amplifier, achieving a remarkably natural sound quality, almost if it were a non-feedback equipped circuit. The design has been conceived and expanded upon from first principles using simulation technology and painstaking research. By repeatedly auditioning, rigorously scrutinizing and combining specially selected components, we have achieved supreme performance characteristics and a level of quality suitable for use in Luxman’s next-generation products. In producing LIFES Version 1.0, by carefully reimagining the entire circuit, we succeeded in reducing the number of paralleled elements while improving performance. The distortion in the amplification stage has been reduced to less than half of our previous system. The output stage features a 3-stage Darlington triple-paralleled push-pull configuration and achieves a class AB power output of 110W+110W (8Ω) and 210W+210W (4Ω). The high output power, comparable to that of a separate power amplifier, effortlessly realizes a natural soundstage, full of energy, to confidently drive any compatible speaker system, and bring out the best of its characteristics.

Our latest amplification feedback engine brings music to life with LIFES Version 1.0Luxman will celebrate our 100th anniversary in 2025 and we are proud to announce the successor to our ODNF* feedback circuitry, which has contributed to the audio quality 

Luxman L-507Z Integrated Amplifier

Rated output	110W+110W（8Ω）220W+220W（4Ω） Input sensitivity/ input impedance	PHONO（MM）: 2.5mV / 47kΩ PHONO（MC ）： 0.3mV / 100Ω LINE: 180mV / 47kΩ BAL.LINE: 180mV / 79kΩ MAIN IN: 1.05V / 47kΩ Output voltage	PRE OUT: 1V Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3dB) Total harmonic distortion	0.007% or less (8Ω, 1kHz) 0.03% or less (8Ω, 20Hz to 20kHz) S/N ratio (IHF-A)	PHONO (MM): 91dB or more PHONO (MC): 75dB or more LINE: 105dB or more Volume adjustment	New LECUA1000 Amplification feedback circuit	LIFES 1.0 Output configuration	Bipolar 3-parallel push-pull Damping factor	300 Max. amount of tone control	BASS: ±8dB at 100Hz  TREBLE: ±8dB at 10kHz Power supply	230V~(50Hz) / 115V~(60Hz) Power consumption	350W 886W (under no signal), 0.4W (at standby) External dimensions	440(W) x 178(H) x 454(D) mm front side knob of 20mm and rear side terminal of 27mm included in depth Net weight	25.4kg (main unit) Accessories	Remote control (RA-17A) Power cable

Introducing our next-level “single-chassis separates” concept,pursuing the ideal with a new, all-in-one flagship amplifier.Taking our Z-Series integrated amplifiers to a performance peak. As the premium model for the new Z-Series generation, the L-509Z has evolved beyond the concept of a traditional integrated amplifier. Both the preamplifier and power amplifier sections simultaneously use our new generation amplification feedback engine “LIFES” for the first time. The volume control is supported by our new “LECUA-EX” attenuator system that suppresses sound quality deterioration and realizes a more precise feel of operation. The “single-chassis separates” concept, which aims for the ultimate in integrated amplifiers, now achieves unprecedented performance. Pursuing the ideals of audio enthusiasm, we are combining our passion for music with improved technology. The L-509Z, a new pinacle of LUXMAN integrated amplifier design.  Single Chassis Separate. Class AB, 120W 8Ω, 240W 4Ω, 2 x LIFES Feedback Engine, 3-band Tone-EQ, LECUA-EX, Peel coat amplifier and audio circuit boards, 12v Trigger, IR Control Remote.

Introducing our next-level “single-chassis separates” concept,pursuing the ideal with a new, all-in-one flagship amplifier.Taking our Z-Series integrated amplifiers to a performance peak. As the premium model for the new Z-Series generation, the L-509Z ha

Luxman L-509Z Integrated Amplifier

Our latest amplification feedback engine literally brings music to life with LIFES* Version 1.0.  Electronically controlled attenuator LECUA-EX* incorporating an elaborate rotation mechanism.  Highly regulated power supply featuring a bespoke, highly regulated 600VA El transformer and newly developed large-capacity filter capacitors (10,000μFx 8).

The built-in high-quality phono equalizer circuit, which supports both MM and MC cartridges, features a new two-step gain switch to select between high and low MC settings to accommodate a wider range of MC cartridges, enriching quality vinyl playback in terms of both operation and sound quality. And a Mute-Button is now featured on the front panel.  3-band tone control In addition to BASS and TREBLE, a new MIDDLE control effective in the vocal and lead instrument frequencies bandwidth has been included. LR balance, line straight, loudness, and other functions are also conveniently at your fingertips.

The top panel is made of ultra-thick aluminum with an exquisite hairline finish. Large ventilation holes are carefully machined one by one to ensure efficient heat dissipation. Supporting the unit are four large insulator feet made from cast iron, their density gradient protecting the main chassis from unwanted external vibrations.  Large needle-movement VU level meter and 7-segment LED.  Headphones outputs with ground isolation

Rated output	120W + 120W (8Ω) / 220W + 220W (4Ω)  Input sensitivity/ input impedance	PHONO (MM): 2.5mV/47kΩ PHONO (MC-H): 0.3mV/100Ω PHONO (MC-L): 0.1mV/40Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/79kΩ MAIN IN: 1.1V/47kΩ Output voltage	PRE OUT: 1V Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3dB) Total harmonic distortion	0.007% or less (8Ω, 1kHz) 0.03% or less (8Ω, 20Hz to 20kHz) S/N ratio (IHF-A)	PHONO (MM): 87dB or more PHONO (MC-H): 70dB or more PHONO (MC-L): 62dB or more LINE: 106dB or more Volume adjustment	LECUA-EX Amplification feedback circuit	LIFES 1.0 Output configuration	Bipolar 4-parallel push-pull Damping factor	330 Max. amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 760Hz TREBLE: ±8dB at 10kHz Power supply	230V~(50Hz) / 115V~(60Hz) Power consumption	390W 150W (under no signal), 0.5W (at standby) External dimensions	17.3" x 7.6"  19.2" front side knob of 20mm and rear side terminal of 37mm included in depth Net weight	64.6 lbs

LUXMAN’s LMC-5 marks the return of moving coil phono cartridge production after a 40 year hiatus! This latest effort boasts a cross-mounted iron core, with unique signal generating coil structures, allied to an efficient compact magnetic system.  Record groove contact is achieved via a SHIBATA profile stylus mounted to an aluminum pipe cantilever enabling excellent tracing ability with low background noise. In addition, the unique and sonically advantageous housing structure was achieved through research, repeated prototyping and attentive fine tuning. We have developed the LMC-5 with confidence and appreciation for all who love vinyl playback and value its musicality.

LUXMAN’s LMC-5 marks the return of moving coil phono cartridge production after a 40 year hiatus! This latest effort boasts a cross-mounted iron core, with unique signal generating coil structures, allied to an efficient compact magnetic system.  Record g

Luxman LMC-5 MC Cartridge

ype	MC (MOVING COIL) Internal impedance	4.7Ω (1kHz) Tracking force	2.1 to 2.3g (2.2g as standard) Output voltage	0.4mV (1kHz, 3.54cm / sec.) Frequency response	10Hz to 35kHz Channel separation / balance	28dB (1kHz) / 0.5dB (1kHz) Recommended load impedance (when head amplifier is connected)	40Ω or more Recommended load impedance (When step-up transformer is connected)	2.5 to 10Ω Dynamic compliance	8 x 10-6cm / dyne (100Hz) Stylus	Solid diamond / SHIBATA stylus Cantilever	Φ0.5mm aluminum Vertical tracking angle	25° Magnet	Samarium-cobalt magnet BH20 Coil	30μm UEW Material of magnetic circuit	Pure iron Terminals	Φ1.2mm, White (L+) , Blue (L−) , Red (R+) , Green (R-) Body	Aluminum A6063 Dimensions, Threaded holes	17.0 (W) x 18.3 (H) x 21.3 (D)mm (excluding terminals), M2.6mm x 2 Weight	8.5g Accessories	Manual, Washer x 2, Screws M2.6 (5mm x 2, 8mm x 2, 10mm x 2), Hex wrench and stylus cover

The LTA-710 is a universal, static balance tonearm. Jointly  developed by LUXMAN and SAEC. 10 inch effective length, height, stylus pressure, and anti-skating adjustments.  Incl. headshell w/ D.U.C.C. lead wires, phono cable, counter weight, mounting base.

The LTA-710 is a universal, static balance tonearm. Jointly  developed by LUXMAN and SAEC. 10 inch effective length, height, stylus pressure, and anti-skating adjustments.  Incl. headshell w/ D.U.C.C. lead wires, phono cable, counter weight, mounting base

Luxman LTA-710 Tone Arm

Newly developed, completely original tonearm  Specially developed for the PD-191A is our LTA-710 static balanced tonearm which employs knife-edge bearing technology for excellent initial movement sensitivity. A joint development with the audio brand SAEC, who have been designing tonearms for more than 40 years, the LTA-710 brings many highly regarded technologies to the LUXMAN turntable family. A fully-fledged original arm design that required two and half years to develop. By setting the effective arm length to 10 inches, tracking errors are further suppressed and resistance to vinyl surface vibration effects is enhanced. Even the gentlest of musical signals picked up by the phono cartridge from the grooves on the record are reproduced faithfully. In addition, the LTA-710 supports detailed settings such as stylus pressure, anti-skating, height adjustment according to the cartridge to be installed, etc., which is possible only because the tone arm is assembled with high mechanical precision to thoroughly maintain playback fidelity.

The M-10x is our flagship stereo/mono power amplifier designed to replace the long-running M-900u, first released in 2013. Years in development, M-10x becomes a premier model in our next-generation lineup to celebrate the 100th anniversary of Luxman’s founding in 1925.  Superbly crafted and with most outstanding sound quality, the M-10x is destined to satisfy audiophiles and music lover’s with its almost limitless loudspeaker drive capability.  Original Luxman amplifier design hallmarks, such as ODNF circuitry were carefully analyzed and then further evolved through extensive computer simulations to achieve a radical improvement in audio performance. Only after repeated new circuit components auditioning and prototype listening tests were the results judged suitable for adoption as “LIFES1.0” in Luxman’s new M-10x.  A three dimensional chassis housing design, in common with the D-10x is featured. Improved LED backlit analog level (VU) meters are employed with the left channel meter exactly centered for BTL-mono use priority. Equipped with 12 volt trigger input/output connections to daisy chain multiple amplifiers in a home theater or enable convenient integration into automated systems.

The M-10x is our flagship stereo/mono power amplifier designed to replace the long-running M-900u, first released in 2013. Years in development, M-10x becomes a premier model in our next-generation lineup to celebrate the 100th anniversary of Luxman’s fou

Luxman M-10X Amplifier

Looking ahead to the 100th anniversary of our founding in 2025, we have returned to the fundamentals of music playback and have finally achieved a LUXMAN milestone, while still looking toward the future, we present our new generation flagship stereo power amplifier, the M-10X.

The most important innovation is the realization of our new amplification feedback engine “LIFES”, which has been developed and refined through the skillful attention of LUXMAN’s technical team. While based on our traditional ODNF technology, we implemented a fundamental review of the system and every detail from the layout down to individual components which all contribute to a rich musicality, full of vitality.

High performance drivability enhances playback through any speaker system. A beautiful chassis housing design, with blasted white finish, is proudly complimented with proper analog meters. This exquisite flagship model, the M-10X, can evoke what we mean by the true depth of sound, marking the beginning of a new era for LUXMAN.

Solid state, class-AB power amplifier (output stage biased into class-A operation up to 12W). Inputs: 1 pair single-ended (RCA), 1 pair balanced (XLR). Outputs: 2 pairs binding posts. Power output: 150Wpc into 8 ohms (21.76dBW), 300W into 4 ohms (21.76dBW), 600W into 8 ohms (27.8dBW) as bridged monoblock (BTL). Instantaneous maximum output power: 1200W into 1 ohm (21.76dBW), 2400W into 2 ohms (21.76dBW), BTL. Frequency response: 20Hz–20kHz, +0/–0.1dB; 1Hz–130kHz, +0/–3dB. Voltage gain: 29dB. Input sensitivity (for 150W into 8 ohms): 1.24V. Input impedance: 51k ohms (unbalanced, "Line"), 28k ohms (balanced). Damping factor: 600 according to EIAJ Current Injection Method. THD: <0.003%, 1kHz at 150W into 8 ohms, <0.04%, 20Hz–20kHz. Signal/noise: 117dB, IHF A-weighted. Power consumption: 540W (max), 250W (no signal), 1W, standby. Dimensions: 17.3" (440mm) W × 8.8" (224mm) H × 19.1" (485mm) D. Weight: 106.5lb (48.4kg).

The MQ-88uC has an elegant dark brown finish, realizing a modern classical appearance reminiscent of our finest legacy products. This model’s improved clarity and warm, accurate audio reproduction, unique to vacuum tube products, and the quality of the components and engineering shine through. We strongly feel that the introduction of new technology and added customization will prove integral to this model’s appeal as a modern day vacuum tube amplifier.

The MQ-88uC has an elegant dark brown finish, realizing a modern classical appearance reminiscent of our finest legacy products. This model’s improved clarity and warm, accurate audio reproduction, unique to vacuum tube products, and the quality of the co

Luxman MQ-88uC Vacuum Tube Amplifier

Rated output	25W + 25W (4Ω, 8Ω, 16Ω) Input sensitivity	890mV/25W input impedance	32kΩ Frequency response	20Hz to 20kHz (+0, -0.5dB) 10Hz to 100kHz (+0, -3.0dB) Total harmonic distortion	0.1% (1kHz/1W) 0.5% (20Hz to 20kHz/1W) S/N ratio (IHF-A)	105dB Circuit	Driver: Mullard, Output tubes: Triode connection Vacuum tubes	ECC83S×2, ECC82×2, KT88×4 Power supply	230V~(50Hz)/115V~(60Hz) Power consumption	170W, 140W (under no signal) External dimensions	440(W) x 184(H) x 230(D) mm 17mm front panel knob of and 28mm rear panel terminals are included in the depth measurement Net weight	16.1kg (main unit) Accessories	Power cable Speaker terminal Supported Y-lug terminal dimension	Width of part a: 14.5mm or less Width of part b: 7.5mm or more *Connection may be difficult depending on the shape of the Y-lug terminal.

"LUXMAN Stream", a dedicated control application for this unit, provides sophisticated operability, allowing users to select music sources, create playlists, and configure various settings for this unit.Core decoding of MQA format sound sources supported (ON/OFF available)PCM/DSD sampling function that can be set for each playback format.Planned be compatible as an output device for the popular Roon comprehensive music playback softwareThe NT-07 is equipped with a powerful audio signal processing module based on the latest generation of application processors, a thorough, audio focused noise suppression system, a dedicated control app compatible with smartphones and tablets, infrared remote control and a slender, full-size chassis that can easily integrate into any existing system.This upgrade can realize a whole new world of listening enjoyment, configurable to suit the listener's tastes.Sound sources can be selected from files stored on UPnP (Open Home) compatible network storage (NAS) or the latest music streaming service (Qobuz, Tidal, Spotify), etc. The system supports sampling frequencies of up to 768kHz/32bit PCM and 22.4 MHz DSD.

"LUXMAN Stream", a dedicated control application for this unit, provides sophisticated operability, allowing users to select music sources, create playlists, and configure various settings for this unit.Core decoding of MQA format sound sources supported 

Luxman NT-07 Network Streamer

Inheriting the PD-151A’s excellent performance and functional beauty while featuring a new, highly sensitive original specification tonearm, is our highly anticipated new model, The PD-151 MARK-II. The PD-151 MARK-II has arrived as a new benchmark for belt-drive integrated analog players. We deliver genuine analog vinyl playback excellence, inviting the listener into a world different from digital audio.

Inheriting the PD-151A’s excellent performance and functional beauty while featuring a new, highly sensitive original specification tonearm, is our highly anticipated new model, The PD-151 MARK-II. The PD-151 MARK-II has arrived as a new benchmark for bel

Luxman PD-151 Mark II Turntable with Dustcover

Luxman PD-151 Mark II Turntable with Dustcover.  The charm of timeless vinyl playback deepens thanks to our LUXMAN PD-151mkII, A new standard in the pursuit of functional beauty.

The PD-151mkII was developed for the music listener to fully enjoy the luxurious audio experience unique to analog, with vinyl phonograph records continuing popularity as an attractive music playback medium. Inheriting that model’s excellenct

Phono motor section Drive system	Belt drive system Motor	Brushless DC motor with PID control Platter	30cm machined alminum plate Revolution	33 1/3rpm, 45rpm, 78rpm(3 speeds selectable) Revolution adjustment range	±6%(each rotation speed adjustable independently) Wow and flutter	0.04% or less(W.R.M.S.) Weight(Platter)	4.0kg Tone arm section * Cartridge is not included Type	Static balanced, S shaped, universal type Bearing	Single point cross suspension Effective length	229mm Overhang	15mm Tracking error angle	+1.9° to -1.1° Applicable cartridge weight	4 to 12g (including headshell 17 to 25g) Adjustable height range	38 to 60mm Anti-skating	0 to 3g Power source and others * Dust cover is not included Power source	230V~ 50Hz Power consumption	6W Dimensions	465 (W) × 133(up to top face of platter)(H)× 393(D) mm Net weight	15.7kg (main unit) Accessories	Platter, Headshell, Rubber mat Rubber belt,Platter mount handle (2pieces) EP adaptor, Counterweight Arm adjustment hex wrench set (3types) Flathead screwdriver for rotation speed adjustment phono cable (DIN→RCA : already installed on the unit), Power cable

LUXMAN introduces the PD-191A, a premium turntable system designed to replace the long running PD-171 series.  Savor the endlessly rich warmth of a piece of music and that special sense of time flowing differently when you play a cherished analog recording. PD-191A is a superb player capable of delivering the excellence of vinyl recordings playback experiences. Our newly developed, original tonearm, with extremely high initial sensitivity, uses a knife-edge vertical bearing system to realize those sensitive movements that make up the finest nuances of a musical moment. Combining a silent and refined DC motor belt-drive system supported by a robust power supply; PD-191A offers a truly high-fidelity and emotional vinyl listening experience.

LUXMAN introduces the PD-191A, a premium turntable system designed to replace the long running PD-171 series.  Savor the endlessly rich warmth of a piece of music and that special sense of time flowing differently when you play a cherished analog recordin

Luxman PD-191A Turntable with Dustcover

●Turntable drive section	 Drive system	Belt drive system Motor	Brushless DC motor with PID control Material	Machined aluminum, Surface finish: Diamond cut Revolution	33 1/3rpm, 45rpm, 78rpm (3 speeds selectable) Revolution adjustment range	±6% (each rotation speed adjustable independently) Wow and flutter	0.04% or less (W.R.M.S.) Weight	5.2kg (Platter) ●Tonearm section	 Type	Static balanced, S shaped, universal type Bearing	Concealed vertical knife edge Effective length	256mm Overhang	16mm Tracking error angle	+1.07° to -1.52° Applicable cartridge weight	4 to 11g (including headshell 17 to 24g) Adjustable height range	22mm Anti-skating	0 to 4g ●Main unit	 Power source	230V～50Hz / 115V～60Hz Power consumption	5W Dimensions	491(W) × 128(to the upper surface of the platter) (H)× 399(D) mm Net weight	24.8kg (main unit), 26.4kg (with dust cover) Accessories	Platter, Headshell (D.U.C.C lead wire included) Rubber mat, Rubber belt, Platter mount handle (2 pieces), EP adaptor, Counterweight, Anti-skating weight, Arm adjustment hex wrench set (2 types), Flathead screwdriver for rotation speed adjustment Arm base removal hex wrench, Phono cable (DIN→ RCA : already installed in the unit), Power cable

In the 1960s, when the audio industry moved en masse into transistor amplifiers, LUXMAN stood apart. We recognized the ineffable beauty of vacuum tube audio, and we’ve continued to build tube components without interruption. Part of LUXMAN’s NeoClassico II Series, the SQ-N150 is the latest heir to that proud tradition, delivering music reproduction of exceptional warmth and clarity.

In the 1960s, when the audio industry moved en masse into transistor amplifiers, LUXMAN stood apart. We recognized the ineffable beauty of vacuum tube audio, and we’ve continued to build tube components without interruption. Part of LUXMAN’s NeoClassico I

Luxman SQ-N150 NeoClassico Integrated Amplifier

Luxman SQ-N150 NeoClassico Integrated Amplifier - Meticulous vacuum tube engineering

Rated output	10W+10W(6Ω) Input sensitivity/ input impedance	PHONO (MM): 3.0mV/47kΩ PHONO (MC): 0.33mV/100Ω LINE: 180mV/47kΩ Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 80kHz (within -3.0dB) Total harmonic distortion	1% or less (1kHz, 10W/6Ω) S/N ratio (IHF-A)	PHONO (MM): 84dB or more PHONO (MC): 64dB or more LINE: 95dB or more Circuit	Driver :P-K split phase inversion circuit Output :Pentode power tubes Vacuum tubes	ECC83×2, EL84×4 Power supply	230V~(50Hz) / 115V~(60Hz) Power consumption	98W External dimensions	297(W) x 188(H) x 251(D) mm 20mm front panel knob of and 21mm rear panel terminals are included in the depth measurement Net weight	12.4kg (main unit) Accessories	Remote control (RA-25), Power cable

Most Popular

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

<avb-promotions data-type="custom" data-banner-id="13403"></avb-promotions>  <avb-promotions data-type="custom" data-banner-id="13659"></avb-promotions>  <avb-promotions data-type="custom" data-banner-id="767237"></avb-promotions>

Default Header After Global Promotions

<avb-header-before>  <avb-designer-block data-id="28" class="avb-typography dsg-block-28-header-before"> <div class="avb-grid"> <div class="avb-grid__column avb-grid__column--small-12 dsg-block-28-header-before__no-padding"> <div class="avb-wrapper dsg-block-28-header-before__content">  <span class="dsg-block-28-header-before__heading"> Connect With&nbsp;Us </span>  <avb-link class="dsg-block-28-header-before__link" data-href="https://www.facebook.com/AVTnashua/" target="_blank"> <span class="fab fa-facebook-f dsg-block-28-header-before__icon"></span> </avb-link>  <avb-link class="dsg-block-28-header-before__link" data-href="https://www.instagram.com/avtherapy" target="_blank"> <span class="fab fa-instagram dsg-block-28-header-before__icon"></span> </avb-link>  <avb-link class="dsg-block-28-header-before__link" data-href="https://twitter.com/AvTherapy" target="_blank"> <span class="fa-brands fa-x-twitter dsg-block-28-header-before__icon"></span> </avb-link>  <avb-link class="dsg-block-28-header-before__link" data-href="https://www.yelp.com/biz/audio-video-therapy-nashua" target="_blank"> <span class="fab fa-yelp dsg-block-28-header-before__icon"></span> </avb-link> </div> </div> </div> </avb-designer-block> </avb-header-before> <style> /* ==================== Header-before (block-28-header-before) ==================== */ .dsg-block-28-header-before__no-padding { padding: 0; } .dsg-block-28-header-before__content { text-align: center; padding: 0.55rem; background-color: #100e16; font-family: 'Noto Sans KR', sans-serif; } .dsg-block-28-header-before__icon { padding: 0 0.5rem; } .dsg-block-28-header-before__icon:hover { background: -webkit-gradient(linear, left top, left bottom, from(#ed1c24), to(#f7941d)); -webkit-background-clip: text; -webkit-text-fill-color: transparent; } .dsg-block-28-header-before__heading { color: #f7941d; text-transform: uppercase; font-size: 1.1em; font-weight: 300; } .dsg-block-28-header-before__link, .dsg-block-28-header-before__link:focus, .dsg-block-28-header-before__link:visited { color: #fff; font-weight: 400; font-size: 1.1rem; transition: 0.3s; } .dsg-block-28-header-before__link:hover { background: -webkit-gradient(linear, left top, left bottom, from(#ed1c24), to(#f7941d)); -webkit-background-clip: text; -webkit-text-fill-color: transparent; } .dsg-block-28-header-before__location-mobile { display: block; } .dsg-block-28-header-before__hider-mobile { display: none; } @media screen and (min-width: 600px) { .dsg-block-28-header-before__location-mobile { display: inline; } .dsg-block-28-header-before__hider-mobile { display: inline; } } @media screen and (min-width: 960px) {} @media screen and (min-width: 1280px) {} @media screen and (min-width: 1600px) {} </style>

Luxman

$2,395.00

$8,495.00

$19,995.00

$5,995.00

$23,995.00

$3,195.00

$9,995.00

$16,995.00

$2,795.00

$7,495.00

$5,995.00

$8,995.00

$12,495.00

$2,695.00

$2,995.00

$19,995.00

$5,995.00

$7,495.00

$6,490.00

$13,390.00

$3,495.00

Is It Time To Plan Your Next Great Project? Great projects start with great plans! Let our team find the right solution to your great ideas. Send us your details, and one of our friendly and knowledgeable crew will help you out.

Info

Contact