The new Quicksilver Headphone Amp will drive any headphone to very loud levels and uses no circuit boards or transistors. It is completely point to point handwired and the only components in each channel signal path are 2 tubes, an Alps volume control, 1 capacitor and 1 output transformer.

The new Quicksilver Headphone Amp will drive any headphone to very loud levels and uses no circuit boards or transistors. It is completely point to point handwired and the only components in each channel signal path are 2 tubes, an Alps volume control, 1 

Quicksilver Audio Headphone Amplifier

Output type	transformer coupled single ended class A triode Input impedance	100 kohms Output impedance	2.2 ohms Gain	24 db Power Consumption	38 watts Tube Complement	2-12AX7 input 2-6BQ5 output Maximum output	7 volts rms into 30 ohms or higher load Polarity	Non inverting Distortion	less than .01% at 1khz into 30 ohms or higher load Recommended headphone impedance	Will drive any headphone from 20 to 600 ohms impedance Dimensions                            12″ deep x 7″ wide x 5.5″ high  Weight                                     16 pounds

The new KT Mono amp retains the high damping factor and low distortion of the Horn Mono but with enough power to handle inefficient and difficult to drive speakers. The amplifier accepts KT66, KT77, KT88, KT90, KT99, KT120, KT150, and KT170 power tubes and when ordered  with KT150s will produce 100 watts. It also has low distortion all the way up to full power but at reduced power gives the efficiency, finesse and delicacy of a low powered amplifier.

The new KT Mono amp retains the high damping factor and low distortion of the Horn Mono but with enough power to handle inefficient and difficult to drive speakers. The amplifier accepts KT66, KT77, KT88, KT90, KT99, KT120, KT150, and KT170 power tubes an

Quicksilver Audio KT Mono Amplifier - Mono Pair

Power Output	80 watts into 4 or 8 ohms Power Bandwidth	14 Hz to 70 KHz Damping Factor	20 Input Sensitivity	1.2 volts Input Impedance	100 Kohm I.M. Distortion:	less than 0.5% at 80 watts Tube Complement	two KT88, 1-12AX7, 1-12BH7 Power Consumption	100 watts at idle 240 watts at full power Chassis	Black chassis Chrome transformer covers Dimensions	6″H, 14.5″L, 9.25″W Weight	40 lbs. each U.S. Warranty	3 years parts and labor & 90 days for tubes

The latest version of the Quicksilver Line Stage offers a simplified switching and signal path. With almost 10 times the output current capability of the previous Line Stage it will drive any amplifier input impedance and interconnect cable with ease. The new Linestage embodies the Quicksilver philosophy “simplicity is the essence of good engineering”.Price $1495. add $50 for home theater pass-through which routes the Video inputs directly to the preamp outputs when the preamp is off.Price for 230 volt/50 Hz add $55.

The latest version of the Quicksilver Line Stage offers a simplified switching and signal path. With almost 10 times the output current capability of the previous Line Stage it will drive any amplifier input impedance and interconnect cable with ease. The

Quicksilver Audio Line Stage Preamplifier

Bandwidth	0.1 Hz to 100 KHz +0,-3db IM Distortion	less than 0.08% at 1v output Harmonic Distortion	less than 0.08% at 1v output from 10 Hz to 40 KHz Gain	18 db Input Impedance	100 Kohm, 20 Hz-20 KHz Output Impedance	100 ohms, 20 Hz-20 KHz Output Polarity	inverted Maximum Input	30 volts RMS, 20 Hz-20 KHz Maximum Output	60 volts RMS, 20 Hz-20 KHz Noise	20 microvolts RMS residual IHF weighted noise output with gain control at minimum Tube Complement	2-12AT7 Dimensions	3″H, 9 1/2″D, 15″W Front Panel	3 1/4″H, 17″W Weight	12 lbs.

The new Quicksilver Phono Preamp offers high gain, low distortion, low output impedance and both active and passive RIAA equalization.The power supply includes 2 chokes, six high voltage electrolytic capacitors and five stages of filtering. The circuit is all tube, no transistors. Gain is 47db at 1 KHz; 67 db when used with the Quicksilver Moving Coil Step-up Transformer.

The new Quicksilver Phono Preamp offers high gain, low distortion, low output impedance and both active and passive RIAA equalization.The power supply includes 2 chokes, six high voltage electrolytic capacitors and five stages of filtering. The circuit is

Quicksilver Audio Phono Stage Preamplifier

Bandwidth	Within +/- 0.25 db of RIAA Gain	47 db at 1 KHz Input Impedance	47 Kohm Output Impedance	250 ohms Tube Complement	2-12AX7  1-12AT7 Dimensions	3″H, 9 1/2″D, 15″W Front Panel	17″ x 3 1/4″ Weight	12 lbs.

Like other Quicksilver products, the solidity of presentation, that is, dimensionality, imaging, and soundstaging, are quite remarkable.” Paul Seydor – The Absolute Sound, October 2002.Improved soundstage width and depth and higher resolution are changes to the Remote Control Linestage Preamp. In addition, a newly designed audio choke increases power and dynamics. The internal shielded cable has been eliminated, output impedance has been lowered and the power supply filtering and capacitance have been increased. A precision motorized Alps attenuator is still the best sounding volume control and video pass-through is available on request.

Like other Quicksilver products, the solidity of presentation, that is, dimensionality, imaging, and soundstaging, are quite remarkable.” Paul Seydor – The Absolute Sound, October 2002.Improved soundstage width and depth and higher resolution are changes 

Quicksilver Audio Remote Control Line Stage

Bandwidth	0.1 Hz to 80 KHz Gain	18 db Input Impedance	50 Kohms, 20 Hz-20 KHz Output Impedance	600 ohms, 20 Hz-20 KHz Output polarity	+ 180 degrees Tube Complement	2-6DJ8, Note:6N1P or 6AQ8 tubes may be substituted Chassis	carbide black Dimensions	3″H, 9 1/2″D, 15″W Front Panel	1/4″ aluminum black anodized 17″ x 3 1/4″ Weight	12 lbs.

Most Popular

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

<avb-promotions data-type="custom" data-banner-id="13403"></avb-promotions>  <avb-promotions data-type="custom" data-banner-id="13659"></avb-promotions>  <avb-promotions data-type="custom" data-banner-id="767237"></avb-promotions>

Default Header After Global Promotions

<avb-header-before>  <avb-designer-block data-id="28" class="avb-typography dsg-block-28-header-before"> <div class="avb-grid"> <div class="avb-grid__column avb-grid__column--small-12 dsg-block-28-header-before__no-padding"> <div class="avb-wrapper dsg-block-28-header-before__content">  <span class="dsg-block-28-header-before__heading"> Connect With&nbsp;Us </span>  <avb-link class="dsg-block-28-header-before__link" data-href="https://www.facebook.com/AVTnashua/" target="_blank"> <span class="fab fa-facebook-f dsg-block-28-header-before__icon"></span> </avb-link>  <avb-link class="dsg-block-28-header-before__link" data-href="https://www.instagram.com/avtherapy" target="_blank"> <span class="fab fa-instagram dsg-block-28-header-before__icon"></span> </avb-link>  <avb-link class="dsg-block-28-header-before__link" data-href="https://twitter.com/AvTherapy" target="_blank"> <span class="fa-brands fa-x-twitter dsg-block-28-header-before__icon"></span> </avb-link>  <avb-link class="dsg-block-28-header-before__link" data-href="https://www.yelp.com/biz/audio-video-therapy-nashua" target="_blank"> <span class="fab fa-yelp dsg-block-28-header-before__icon"></span> </avb-link> </div> </div> </div> </avb-designer-block> </avb-header-before> <style> /* ==================== Header-before (block-28-header-before) ==================== */ .dsg-block-28-header-before__no-padding { padding: 0; } .dsg-block-28-header-before__content { text-align: center; padding: 0.55rem; background-color: #100e16; font-family: 'Noto Sans KR', sans-serif; } .dsg-block-28-header-before__icon { padding: 0 0.5rem; } .dsg-block-28-header-before__icon:hover { background: -webkit-gradient(linear, left top, left bottom, from(#ed1c24), to(#f7941d)); -webkit-background-clip: text; -webkit-text-fill-color: transparent; } .dsg-block-28-header-before__heading { color: #f7941d; text-transform: uppercase; font-size: 1.1em; font-weight: 300; } .dsg-block-28-header-before__link, .dsg-block-28-header-before__link:focus, .dsg-block-28-header-before__link:visited { color: #fff; font-weight: 400; font-size: 1.1rem; transition: 0.3s; } .dsg-block-28-header-before__link:hover { background: -webkit-gradient(linear, left top, left bottom, from(#ed1c24), to(#f7941d)); -webkit-background-clip: text; -webkit-text-fill-color: transparent; } .dsg-block-28-header-before__location-mobile { display: block; } .dsg-block-28-header-before__hider-mobile { display: none; } @media screen and (min-width: 600px) { .dsg-block-28-header-before__location-mobile { display: inline; } .dsg-block-28-header-before__hider-mobile { display: inline; } } @media screen and (min-width: 960px) {} @media screen and (min-width: 1280px) {} @media screen and (min-width: 1600px) {} </style>

Quicksilver Audio

Quicksilver Audio Headphone Amplifier

$1,198.00

Quicksilver Audio KT Mono Amplifier - Mono Pair

$3,395.00

Quicksilver Audio Line Stage Preamplifier

$1,495.00

Quicksilver Audio Phono Stage Preamplifier

$1,595.00

Quicksilver Audio Remote Control Line Stage

$1,595.00

Is It Time To Plan Your Next Great Project? Great projects start with great plans! Let our team find the right solution to your great ideas. Send us your details, and one of our friendly and knowledgeable crew will help you out.

Product Research

Info

Contact

Connect with Us

Associations