For screen reader problems with this website, please call603-888-97776 0 3 8 8 8 9 7 7 7Standard carrier rates apply to texts.

Connect With Us
AV Therapy

AV Therapy

603-888-9777

Audio-Technica AT-LP7 Fully Manual Belt-Drive Turntable

Model #: AT-LP7

$849.00

At a Glance

Audio-Technica AT-LP7 Fully Manual Belt-Drive Turntable with speed-sensor system and built-in phono pre-amplifier

WarningProposition 65 Warning for California Residents
Audio-Technica AT-LP7 Fully Manual Belt-Drive Turntable

Misc. Specs

Product Weight (lbs.)18.3
ColorBlack
Width (in.)17.72
Depth (in.)13.86
Height (in.)6.18
Drive TypeBelt-Drive
Turntable Speed33.3; 45
Analog Audio(RCA) Output1
Color Finish NameBlack
Manufacturer Warranty1 Year

Specifications

Type2-speed, fully manual operation
MotorDC motor
Drive MethodBelt drive
Speeds33-1/3 RPM, 45 RPM
Turntable PlatterPolyoxymethylene
Wow and Flutter<0.08% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio>60 dB
Output LevelPre-amp “PHONO”: 4.5 mV nominal at 1 kHz, 5 cm/sec, Pre-amp “LINE (MM)”: 280 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp GainMM: 36 dB nominal, RIAA equalized, MC: 56 dB nominal, RIAA equalized
Power Supply Requirements100 to 240 V AC, 50/60 Hz, 0.6 A max.
Power Consumption5.5 W
Dimensions450.0 mm (17.72") W x 352.0 mm (13.86") D x 157.0 mm (6.18") H
Weight8.3 kg (18.30 lbs.), without dust cover
Accessories IncludedVM520EB Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; dust cover
Replacement CartridgeVM520EB
TypeStatic balanced J-shaped tonearm
Effective length247 mm
Overhang17 mm
Maximum tracking error angleLess than 2.5°
Stylus pressure adjustment range0 to 2.5 g
Applicable cartridge weight range (including headshell) 15 to 20 g

Audio-Technica AT-LP7 Fully Manual Belt-Drive Turntable

Model #: AT-LP7
Available in Store Only
$849.00

At a Glance

Audio-Technica AT-LP7 Fully Manual Belt-Drive Turntable with speed-sensor system and built-in phono pre-amplifier

Get to know this product.

Audio-Technica began in 1962 as a designer and manufacturer of high-end phonograph cartridges, bringing to the audio world the innovative Dual Moving Magnet stereo cartridge with its outstanding channel separation, extended frequency response and superb tracking.

The AT-LP7 builds on this heritage. Recognizing the critical role a cartridge plays in reproducing high-fidelity audio from vinyl, we designed this fully manual, belt-drive turntable around our VM cartridge line, incorporating the finest materials and structures in support of the cartridge’s performance. The AT-LP7 comes with a VM520EB Dual Moving Magnet Cartridge with a 10 g AT-HS10 headshell and 0.3 x 0.7 mil elliptical bonded stylus. That stylus can be replaced with any of the other six styli available in the VM line, giving users an easy means of upgrading the stylus without buying a whole new cartridge.

The headshell attaches to a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors, and includes an adjustable counterweight and anti-skate control. The height of the tone arm can be adjusted from 0 mm to 6 mm to accommodate a wide variety of cartridges.

The turntable chassis is constructed of 40 mm-thick MDF (medium density fiberboard), an excellent anti-vibration damping material that limits low-frequency acoustical feedback. The anti-resonance platter is made of 20 mm-thick polyoxymethylene and is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation speed of 33-1/3 or 45 RPM. The AT-LP7 also includes a built-in switchable phono/line preamp for connection to components with or without a dedicated phono input, and a selector switch to designate operation with a moving magnet or moving coil cartridge.

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM

Motor features a speed-sensor system to maintain accurate platter rotation speed

VM520EB Dual Moving Magnet Cartridge provides outstanding channel separation and extended frequency response, and allows for easy replacement with any VM stylus

J-shaped tone arm features a metallic gimbal suspension system and precision bearings for excellent tracking

Built-in switchable phono pre-amplifier with selectable modes for moving magnet or moving coil cartridges

20 mm-thick, anti-resonance, polyoxymethylene platter

40 mm-thick MDF (medium density fiberboard) chassis

Lightweight AT-HS10 headshell

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, and dust cover

Useful Documents
Specifications

Specifications

Type2-speed, fully manual operation
MotorDC motor
Drive MethodBelt drive
Speeds33-1/3 RPM, 45 RPM
Turntable PlatterPolyoxymethylene
Wow and Flutter<0.08% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio>60 dB
Output LevelPre-amp “PHONO”: 4.5 mV nominal at 1 kHz, 5 cm/sec, Pre-amp “LINE (MM)”: 280 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp GainMM: 36 dB nominal, RIAA equalized, MC: 56 dB nominal, RIAA equalized
Power Supply Requirements100 to 240 V AC, 50/60 Hz, 0.6 A max.
Power Consumption5.5 W
Dimensions450.0 mm (17.72") W x 352.0 mm (13.86") D x 157.0 mm (6.18") H
Weight8.3 kg (18.30 lbs.), without dust cover
Accessories IncludedVM520EB Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; dust cover
Replacement CartridgeVM520EB
TypeStatic balanced J-shaped tonearm
Effective length247 mm
Overhang17 mm
Maximum tracking error angleLess than 2.5°
Stylus pressure adjustment range0 to 2.5 g
Applicable cartridge weight range (including headshell) 15 to 20 g

Misc. Specs

Product Weight (lbs.)18.3
ColorBlack
Width (in.)17.72
Depth (in.)13.86
Height (in.)6.18
Drive TypeBelt-Drive
Turntable Speed33.3; 45
Analog Audio(RCA) Output1
Color Finish NameBlack
Manufacturer Warranty1 Year
WarningProposition 65 Warning for California Residents